4) You will need to have on hand water line repair tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
Use the sandpaper to remove any loose particles from the hole. It is important for the surface to be properly prepared for these types of gutter water line repair.
You don't want to be paying your plumber to clear the area before they start work particularly if you are paying an hourly rate. Empty cupboards and make sure there is nothing that may cost the plumber time and you money gaining access to the job.
Dirty waste water, after all, leaves your house following the law of gravity. Waste water goes downward to the sewer or septic tank, nice and easy. Behind this simple rule is the multitude of vents and traps to keep the process of waste removal possible. Vents allow air to fill drainpipes, precious air that allow waste water outflow. Traps are those curved S-shaped sections of the pipes under the sink drain. Traps perform a crucial role in forcing most of the water through the drainpipe, but leaving some to seal the area and prevent sewer gas from backing up.
Remove the cap of the faucet using slip-joint pliers. Tape the teeth of the pliers to prevent damage of the surface. Remove the faucet cam washer and water line repair the rotating ball.
Turn the water off at the main shutoff valve at the street. You should be able to take a pair of pliers(or your bare hands) and turn the valve at the water meter to shut off the water to your home. Once you have shut off the water you can cut the pipe around the leak and make the repair.
Re-coat the RV roof every two years. There are a several products for re-coating your RV's roof. Many will products recommend to re-coat every year, but it's not necessary, every two years is perfectly fine. A great affordable option is Camco RV Pro-Tec Rubber Roof Care System.